How do I make my surface laptop boot to the network?

How do I make my surface laptop boot to the network?


  1. Press the volume-up and power buttons on the Surface Laptop to enter the Unified Extensible Firmware Interface (UEFI) settings.
  2. Select Configure boot device order.
  3. Select the PXE Network, and then swipe to the left.
  4. You should receive the “Boot this device immediately” message.

How do I boot from UEFI Surface?

How do I get to the UEFI settings?

  1. Shut down your Surface.
  2. Press and hold the volume-up button on your Surface and at the same time, press and release the power button.
  3. When you see the Surface logo, release the volume-up button. The UEFI menu will display within a few seconds.

How do I boot my surface 3 to network?

  1. Ensure the Surface device is powered off.
  2. Press and hold the Volume Up button.
  3. Press and release the Power button.
  4. After the device begins to boot, release the Volume Up button.
  5. Select Security Tab Under Secure Boot Select Secure Boot Configuration.
  6. Select None.
  7. Select OK, then restart the device to boot to PXE.

How do I get out of UEFI loop Surface?

Press and hold the power button until the screen turns off (about 10 seconds), then release the power button. Press and release the power button to turn your Surface back on.

Can you connect Surface Pro to Ethernet?

The Surface USB-C to Ethernet and USB 3.0 Adapter lets you connect to a network using a wired Ethernet connection. This adapter works with devices that have a USB-C port that supports data.

What is the UEFI network stack?

Unified Extensible Firmware Interface (UEFI) defines the interface between the operating system and platform firmware during the boot, or start-up process. The UEFI network stack enables implementation on a richer network-based OS deployment environment while still supporting traditional PXE deployments. …

How do I fix Surface boot error?

Solution 2: Force restart Press and hold down the power button until your Surface restarts and you see the Windows logo screen (this takes about 20 seconds), then release the power button. For more info, see Force a shutdown and restart your Surface.