Common questions

How do I fix error code NW 31247 7 on PS4?

By Angel Hume

How do I fix error code NW 31247 7 on PS4?

NW-31247-7

  1. If you are using a Wi-Fi connection, place the PS4 and the router closer together, and make sure there are no obstructions between them.
  2. Other devices on your network might be using a large amount of bandwidth.
  3. Check the connection status of the PS4 in [Settings] > [Network] > [Test Internet Connection]

Why does my PS4 say Cannot connect to PlayStation Network?

If your PS4 won’t connect to the internet, the PlayStation Network may be offline. You should also make sure to check your Wi-Fi connection and reset or move your router and modem. You can also try adjusting your PS4’s DNS settings as a final resort to fix connection issues.

How do I fix error code NW 31295 0 on PSN?

NW-31295-0

  1. Run an internet connection test on the PS4 by going to Settings > Network > Test Internet Connection.
  2. Reset your local network connection by powering off your modem or router and waiting 5 minutes before turning it back on.

What is WV 33898 1 on PS4?

PS4 error WV-33898-1 usually occurs when there is no Internet connection available. As a result, users cannot use their applications or browse the Internet on their console.

What does a DNS server Cannot be used mean on PS4?

Whenever you get this error, it means that your system cannot connect to Wi-Fi. To fix it, simply navigate to Settings > Network > Set Up Connection and input the correct network parameters.

How do I fix my PS4 connection timed out?

How to Fix PS4 ‘Cannot Connect to the Wi-Fi Network Within the Time Limit’ Errors

  1. Check your internet connection.
  2. Use a wired internet connection.
  3. Check the PlayStation Network status.
  4. Perform an internet connection test.
  5. Reboot your router and modem and restart the PS4.
  6. Upgrade the router firmware.

How do you fix error code CE 32895 7 on PS4?

1. Rebuild Database

  1. Turn off PlayStation 4.
  2. Connect your PlayStation 4 DualShock 4 controller using the USB cable.
  3. Press and hold the power button for at least seven seconds.
  4. Press PS button on the controller.
  5. You should have access to the safe mode, please select Rebuild Database.