Do I have to have a fence around my pool in Arizona?

Do I have to have a fence around my pool in Arizona?

Arizona law requires that below-ground and above-ground pools must be completely enclosed by a wall, fence, or other barrier that is at least five feet high (as measured from the exterior side), and does not have any openings through which an object four inches or more in diameter could pass.

Do you have to have a fence around your pool in Phoenix?

Swimming Pool Enclosure Requirements All pools, spas and hot tubs within the city of Phoenix are required to be fenced with exterior fencing and most pools also require an interior barrier.

How do you make a pool fence compliant?

In NSW, a pool fence must:

  1. be at least 1.2m high (as measured from the finished ground level)
  2. not leave a gap at the bottom bigger than 10cm from the finished ground level.
  3. if a boundary fence is part of the pool fence, the barrier must be 1.8m high.
  4. not have gaps of more than 10cm between any vertical bars in the fence.

How much does a pool fence cost in AZ?

A pool fence costs most homeowners $1,500 to $10,000+ to purchase and install. On average, you’ll pay anywhere from $15 to $25 per linear foot. The type of materials you go with determine price. Chain-link and mesh run $1,000 to $5,000 while wrought iron, aluminum, vinyl or wood are double that at $2,000 to $12,000.

Are pool fences required in Gilbert AZ?

1. Enclosures. All swimming pools shall be enclosed by walls of a single family residential building or by a solid wall or a chain link or wrought iron fence not less than 5 feet nor more than 6 feet in height.

Do you need a fence around an inground pool?

If your pool is deeper than 18 inches, you are required to install a fence around it. For private pools, there are specific measurements that you are supposed to follow depending on the state or county you live in. There are numerous materials that you can use when installing a fence.

How high does a fence have to be around a pool?

48-inches high
Installed pool fences should be at least 48-inches high from finished ground level, as measured along the outside of the fence and should have no more than a two-inch gap from the bottom of the fence to the ground.

How high should a pool fence be?