What types of substrate can veneer be applied?
Wood Veneer Substrates: A Useful Guide
- Medium density fibreboard (MDF) MDF is one of the most commonly used substrates and is regularly the choice of fine furniture makers thanks to its excellent stability and uniformity.
- Plywood.
- Particle board.
- Hardwood or softwood.
- Natural wood veneers.
What is wood veneer substrate?
A substrate is the material to which a veneer is bonded. With careful preparation and adhesive selection, almost any smooth surface can be veneered.
How is veneer wood produced?
Veneer is made by cutting thin slices off a whole log to make a sheet of wood. There are several ways in which these sheets can be cut. The different kinds of cuts result in different patterns of grain. There are three basic methods: Rotary cutting and Slicing, with a subset of Quarter sawn.
What determines a veneer log?
A veneer log is a large (usually 18″ dbh or more), straight log which has very few or no defects, including limbs, limb scars, holes, ring-shake or separation, lightning scars, pin knots, etc. Other factors, such as sapwood width, color, ingrown bark, and mineral stains are also quality considerations.
What is plywood substrate?
Plywood Express A substrate is the material to which a veneer is bonded. With careful preparation and adhesive selection, almost any smooth surface can be veneered.
Can I put veneer over hardwood?
Even standard 10-mil veneer can be successfully applied to a raw wood surface, especially when covering a small area, once the raw wood surface has been treated with a sealant. Apply a thin and even layer of wood glue (also called white glue) to both the substrate and to the back side of the veneer.
What is a Cabinet substrate?
Particleboard: Made from wood particles mixed together with resin, manufacturers bond this substrate by exerting pressure. Cabinetry makers frequently use particleboard with laminate or vinyl finishes. Medium-Density Fibreboard (MDF): MDF is similar to particleboard. But, it comprises smaller fibres.
What is a substrate in woodworking?
Wood Substrate means a product made of wood, particleboard, plywood, medium density fiberboard, rattan, wicker, bamboo, or composite products with exposed wood grain.
What is veneer thickness?
Wood veneer is thin slices of wood that are usually glued to flat panels such as doors, cabinets, and walls. Today’s standard veneer thickness is 1/52”.
What is wood veneer made out of?
A wood veneer is typically made up of a thin layer of natural hardwood, that is then bonded to a stable composite base material. The purpose of a veneer is that it’s more affordable than solid timber as less actual wood is used, but also, the base material gives the whole thing overall stability.
What length do you cut veneer logs?
Use a tape measure and cut the stick to either 4 feet or 6 feet exactly. I like to use 4-foot-long sticks because most log lengths are divisible by 4 feet. Mark the stick by cutting a groove in it at 2-foot increments.
What does veneer quality mean?
Veneer Trees/Logs: Typically the highest quality logs, most of which come from the butt log (i.e., the first log above the stump). Most veneer buyers require a minimum veneer log length of 8 ft – 6 inches. The extra 6 inches is for trim allowance. However, different veneer markets have different requirements.
What substrates are used with wood veneer?
Here are some common substrates used with wood veneer. MDF is used frequently used on the finest veneered furniture pieces. Its uniformity and stability make it an excellent substrate for veneer work.
What is a veneer?
A veneer is a thin slice of fine, expensive wood that we typically apply to cheaper wood. The purpose of using veneer is that we get the finish of expensive wood at a fraction of the cost. You can get different types of veneers, which vary according to the kind of wood and type of manufacturing process.
Is solid wood ready for veneer glue?
However, if the water flattens out and starts to be absorbed by the substrate, then it is ready for application of veneer glue. The problem with solid wood is that it will expand and contract with seasonal humidity changes in the house.
What kind of woodworker works with wood veneers?
Any woodworker is likely to work a lot with wood veneers, especially those who work on wooden furniture. A veneer is a thin slice of fine, expensive wood that we typically apply to cheaper wood.