What grade are clevis pins?
The straight pin runs through both clevis ends and the mounting plate after which cotter pins are run through both holes to secure the connection. Straight pins are typically manufactured from ASTM A108 Grade 1117 bar stock.
Is standard for clevis pin?
This Indian Standard ( Second Revision) which is identical with ISO 2341:1986 ‘-Clevis pins with head’ issued by the International Organization for Standardization ( ISO ) was adopted by the Bureau of Indian Standards on the recommendations of the Bolts, Nuts and Fasteners Accessories Sectional Committee and approval …
What are clevis pins used for?
“Clevis pin” refers to a type of non-threaded, low cost metal fastener. Functionally similar to a bolt, clevis pins are inserted into drilled holes and used to secure two or more items together, most often to affix one piece of machinery to another.
Are clevis pins hardened?
Yes–clevis pins are typically hardened.
What is clevis pin diameter?
The length of a clevis pin is measured from under the head to the end of the pin. The effective grip length should be measured from under the head to the top of the hole. Brainard Rivet manufactures clevis pins from 3/16″ (4.8 mm) through 5/8″ (15.9 mm) in diameter.
What material are clevis pins made of?
carbon steel
Standard Clevis Pins are made from low carbon steel and stocked plain finish. Additional plating finishes are offered as required. Stainless Steel Clevis Pins are also stocked in various sizes, with other sizes available upon request.
How are clevis pins measured?
How strong is a clevis pin?
The pin can experience 100,000 pounds of force.
How do you size clevis pins?
What is the nominal diameter of the shank of the clevis pin?
12mm
12mm Shank Diameter Clevis Pins with Holes – Build Your Own Custom – Pivot Point.
What is a steel clevis?
Clevis pins are used as a quick and secure fastener in place of bolts and rivets. Designed with both a flat or domed head on one end and cross-hole at the other, a clevis pin is inserted through the holes at the pronged ends of a clevis and is kept in place by a cotter pin.
How much weight can a clevis pin hold?
How do I choose the right clevis pins?
If the pin is made from steel with physical properties lower in value than the steel used for the rod, the pin may not develop the strength of the rod and either shear or bend. A larger pin diameter would then be required. Specify LH or RH thread. Specify material. Specify finish. Specify applicable pin order with Cleveland City Forge Clevis Pins.
What is clevis Table III?
Table III is provided for reference that indicates the maximum Grip, Pin & Tap sizes for each Clevis size. For any combination of tap size and pin diameter shown, the pin in double shear will develop the strength of the rod if both the rod and pin are made from steel having the same physical properties. The pin must be investigated for bending.
What are clevis fasteners?
Clevis fasteners from ITA Fasteners are high precision fasteners which are used when a design needs a superior finish. The pins are designed using cold heading quality wire.
What are your clevises manufactured to meet the dimensional and load ratings?
Our clevises are manufactured to meet the dimensional and load ratings in accordance to the American Institute of Steel Construction (AISC) Manual of Steel Construction. Carbon and alloy steel clevises are forged per ASTM A668, Stainless steel clevises are forged per ASTM A473.