How do I connect my energy meter to my Arduino?
Circuit diagram for IoT based Energy Meter using Arduino and NodeMCU is given above, connect ESP12 as below: Connect Rx of ESP12 -> Tx of Arduino. Connect Tx of ESP12 -> Rx of Arduino. There is one analog pin available in NodeMCU (ESP12), we could use that pin but ESP series can take upto 3.3 volts on their pins.
How do I make an Arduino energy monitor?
How to build an Arduino energy monitor – measuring mains voltage and current URL Embed
- Step One – Gather Components. URL. Embed. You will need:
- Step Two – Assemble the Electronics. URL. Embed.
- Step Three – Upload the Arduino Sketch. URL. Embed.
How can I make a simple energy meter?
Step 1: What You Will Need for a Home Energy Meter
- An Arduino (Uno used here)– Buy Here.
- LCD Shield (Or LCD Screen, follow how to connect an LCD screen)– Buy Here.
- CT – Talema AC1030 or SCT-013-000 – Buy Here.
- 56Ω Burden Resistor– Buy Here.
- 10µF Capacitor– Buy Here.
- 2 x 100K Divider Resistors– Buy Here.
What is IOT based energy meter?
To solve this problem, a smart energy meter is proposed based on Internet of Things (loT). The proposed smart energy meter controls and calculates the energy consumption using ESP 8266 12E, a Wi-Fi module and uploads it to the cloud from where the consumer or producer can view the reading.
How much power does an Arduino consume?
The power consumption of the Arduino Uno is reduced by 88.37% from 98.43mA to 11.45mA. Also the Arduino Mega has a very low power consumption of 11.85mA for the size of the board. The lowest current consumption has the Arduino Pro Mini with 1.58mA.
What is GSM based Smart energy meter?
The proposed energy meter system can incorporate with embedded controller and GSM modem to transmit the data like consumed energy in kWh, generated bill, security services (line Cut/On) over GSM mobile network such as data can be then fed and integrated into existing energy management systems located at power companies …
What is IoT based Smart energy meter?
What is the use of Arduino Uno?
Arduino UNO, main controller, was the interface between energy meter and Global System for Mobile communication (GSM) module. GSM module connect the energy meter to users’ mobile phone. Real Time Clock (RTC) DS1307 was used to get the real time to count and store the usage into the EEPROM.
Is it possible to monitor energy meter’s power consumption on real-time basis?
It would be a huge beneficial for the customers if they can monitor their energy meter’s power consumptions (bill) on a real-time basis. Arduino UNO, main controller, was the interface between energy meter and Global System for Mobile communication (GSM) module.
What is the use of led in Arduino?
It is used as interface energy meter to the arduino. It digital write output ‘HIGH’. When t he LED at energy meter pulse 1. The system also added liquid crystal display (LCD),
What is the difference between Arduino Uno and blynk?
The prototype of project is developed by using Arduino Uno act as the main controller, L293D motor driver, and ultrasonic sensor. Besides that, Arduino IDE was used to write the program of the robot while Blynk apps use as a controller server.