How are circular blades measured?
Though saw blade diameters are measured from the tops of the blade’s teeth, their reach is limited to the gullet. Depending on the type of saw blade and the number of teeth, the gullet will vary in depth quite a bit.
What are the sizes of circular saw blade?
Circular Saw Blade Types
- Handheld circular saws accept smaller blades, those 4-1/2 inches to 7-1/4 inches in diameter.
- Tile saws use 7-inch or 10-inch diamond blades.
- Table saws and compound miter saws use blades 10 inches or 12 inches in diameter.
How deep can a 6 1 2 inch circular saw cut?
2-19/32″
The 18V Brushless Lithium Ion 6-1/2 Inch Deep Cut Circular Saw (C18DBALQ4) is a revolutionary cordless circular saw utilizing a 6-1/2″ blade which allows a 2-19/32″ cutting depth, making it one of the deepest cutting cordless circular saws on the market. This circular saw has a similar cut capacity as a 7-1/4″ saw!
How thick can a 6.5 inch circular saw cut?
2 1/16”
The 6.5 will cut up to 2 1/16”, while the 7 ¼” cuts up to 2 ⅜”. Minor sure, but it’s when you tilt them into 45 degree angles, that the 7 ¼” can do something the 6.5 can’t. Cut through a 2×4.
Can I use a 4 inch blade on a circular saw?
The answer is generally this is not a great idea. A larger blade will put excess stress on the motor, and may not have enough strength to provide the cutting power at the tooth you need.
What is the thickness of a circular saw blade?
The plate of a saw blade is often 1/8 to 1/4 inch thick. The thinner plate means that there is less sawdust and potentially less waste.
What is the most popular size circular saw?
The most widely used circular saw is the 7 1/4 inch, but most refer to this saw as the 7 1/2-inch saw.
Can a 5.5 inch circular saw cut a 2X4?
Yes! A 5.5 inch circular saw blade is perfect for cutting a 2X4. The blade capacity is deep enough to make a crosscut in 1 stroke. If you want to make a 45 bevel cut then you will need to make 2 strokes.
Will a 6 1 2 inch circular saw cut a 2X4?
The larger the blade, the deeper the cut. The most common blade diameter is 7-1/4 inches. Most saws with blade capacities of 6 inches or more can cut through 2-inch dimensional lumber at a 45-degree angle in a single pass.
How thick of wood can a 5 1 2 circular saw cut?
The blade, located on the left side, cuts up to 1-3/4-inch at 90 degrees and 1-3/16-inch at 45 degrees.
What are the different sizes of circular saw blades?
The most common sizes are 6-1/2″, 7-1/4″, 10″ and 12″. The smaller diameters are typically used only for hand-held circular saws while larger diameters are frequently seen on stationary saws.
What size blades do I need for my table saw?
Acceptable sizes vary by saw model but the following generally applies: Handheld circular saws accept smaller blades, those 4-1/2 inches to 7-1/4 inches in diameter. These are typically carbide-tipped. Tile saws use 7-inch or 10-inch diamond blades. Table saws and compound miter saws use blades 10 inches or 12 inches in diameter.
How thick is the plate on a circular saw?
The plate of a circular saw blade is typically 1/8 inch to 1/4 inch thick. Sometimes the plate is thick- er at the eye of the saw and then ta- pers a bit toward the teeth. The thinner plate means that there is less sawdust and potentially less waste.
What should I look for when buying a circular saw?
Also, you have to know what type of material you plan on working with the most: wood, aluminum, plexiglass, sheet metal, etc. Circular saws are versatile tools, but you wouldn’t really want to work on any piece of wood that needs a 10 inch or 12 inch blade to cut through it.