Can you use a footswitch with any amp?
But can you use any footswitch on any amp? A direct answer to this is no. Footswitches come in different forms. Interchanging them can, apart from not working properly, damage your amp.
How can I make my Marshall amp sound better?
Getting a Good Clean Tone
- Select your clean channel or turn the gain down if you don’t have multiple channels.
- Turn off all amp effects and effect pedals.
- Bring the bass, mid & treble knobs all to 12 o’clock.
- Keep the gain fairly low and adjust the volume to a suitable level.
- Jam for a while to get a feel for the tone.
What does the resonance knob do on a Marshall amp?
The resonance control allows you to control the overall bass response of the amp. This is how the low end reacts and feels after the preamp EQ has been applied. Lower settings on a clean tone will give you a tighter, snappier low end.
Will a fender footswitch work on a Marshall amp?
No – you can’t just use any footswitch with any amplifier. Some footswitches are really simple – a make or break connection, but others do different things – sometimes voltage drops, sometimes active circuitry, sometimes polarity changes.
What amp did Eric Clapton use?
Clapton used an old Fender Twin amp with no effects and occasionally an old Fender Champ, plus a Silverface Fender Deluxe and a Blonde Showman head. When Clapton took this album on the road in 1994 and 1995, many of these guitars made the trip with him.
Is the Marshall mg30fx a good AMP?
Own that Marshall sound with this 30W amp. The MG30FX has it all from clean and gentle tones to gutsy, “in your face” overdrive. The 10” speaker offers a big sound that is sure to bring rehearsals to life and shine on stage. If playback doesn’t begin shortly, try restarting your device.
Is there a pedal for the mg30dfx?
I have seen a lot of pedals for the MG series of amps, but most of them say they will only work with the MG50DFX or higher models. the MG30DFX has a footswitch socket so there must be a specific pedal for it, if there is such a thing. With MG50DFX you can also use more traditional 2 button footswitches.
How to make the mg30fx sound like a dsl401?
With the MG30FX, my usual pedal settings that make my DSL401 sing sweetly just sounded very trebly. I had to trim the treble down on the pedals and also on the amp. Also, I turned the gain on the amp down to about 9 Oclock on the clean channel and turned the master up to full. At that setting, it worked fine at rehearsal volume.
How big is the mg30fx speaker?
The MG30FX has it all from clean and gentle tones to gutsy, “in your face” overdrive. The 10” speaker offers a big sound that is sure to bring rehearsals to life and shine on stage. If playback doesn’t begin shortly, try restarting your device.